Collections

How to Build a PVC Arbor Trellis

How to Build a PVC Arbor Trellis


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Jupiterimages/Photos.com/Getty Images

You can turn PVC pipe and plastic trellis into a beautiful and unique arbor trellis, using simple tools you probably already own. You should be able to complete and set up your PVC arbor trellis in the same day. If you need to take down the trellis for some reason, it is just as easy to tear down.

Step 1

Measure out a garden space that is 4 feet by 8 feet and mark the borders with powdered milk.

Step 2

hard at work image by Pix by Marti from Fotolia.com

Dig 2-foot-deep holes at each corner of the planned area, using a post hole digger.

Step 3

Place one PVC post in each hole. Compact the soil in the hole by stepping down on the soil all around the hole.

Step 4

Attach one panel of PVC trellis to both PVC pipes on the 4-foot end. Secure the trellis to the PVC pipes with zip ties. Repeat for other end.

  • Measure out a garden space that is 4 feet by 8 feet and mark the borders with powdered milk.
  • Attach one panel of PVC trellis to both PVC pipes on the 4-foot end.

Step 5

electrical, image by Greg Pickens from Fotolia.com

Cut one of the remaining PVC pipes into 4-foot lengths, using a hacksaw. Cut the remaining piece of this PVC pipe into four 2-inch pieces.

Step 6

Lay out the two 10-foot pieces of PVC pipe on the ground. Attach elbows on each end of these pipes and follow with the 2-inch piece of PVC pipe on each elbow. Attach the PVC pipe "T" to this piece and place the remaining 4-foot pipe into the "T." Connect all this to the elbow that is attached to the 10-foot piece of PVC.

Step 7

Lay the 4-foot by 8-foot piece of PVC lattice on top of this frame and zip-tie it to the posts. Lift and secure this frame to the top of the PVC posts in the ground, making sure to line up the PVC "T" with these posts.

  • Cut one of the remaining PVC pipes into 4-foot lengths, using a hacksaw.
  • Lay the 4-foot by 8-foot piece of PVC lattice on top of this frame and zip-tie it to the posts.

Step 8

plastic cable ties multi color image by robert mobley from Fotolia.com

Secure the top frame to the base by zip-tying the end trellis to the top frame.


Watch the video: Arbor and or trellis anchors or footings, no concrete required (May 2022).